How to Build a Golf Simulator: Complete DIY Home Setup Guide
Build your own home golf simulator step by step. Check launch monitors against your room, choose between a net or a screen, plan your enclosure, and see what each build level costs.
Two main build paths, different budgets.
Decide between a practice-net build (lower cost, portable) or an impact-screen build (immersive, permanent). Your space, budget, and goals determine the best fit.
Step 1: Pick Your Launch Monitor
The launch monitor decides data type, software compatibility and, above all for planning, how much room you need around it.
| Monitor | Type | Space needs |
|---|---|---|
| Garmin Approach R10 | Radar | 6–8 ft behind the ball |
| Rapsodo MLM2PRO | Radar + camera | 6.5–8.5 ft behind the ball |
| Bushnell Launch Pro | Camera | Beside the ball (check maker guidance) |
| SkyTrak+ | Camera | Beside the ball (SKYTRAK documents 10 × 10 ft for the ST MAX) |
| Trackman iO | Radar | Ceiling mount (confirm height with the maker) |
| Foresight GC3 | Camera | Beside the ball (check maker guidance) |
See the full launch monitor room requirements →
Step 2: Choose Net or Impact Screen
Practice Net Setup (Simpler, Cheaper)
- No projector needed: use a tablet or TV to the side
- Portable: easy to store in a garage
- Pairs naturally with rear radar placed behind the ball
Impact Screen Setup (Immersive)
- Screen and frame: an impact screen on an enclosure or frame
- Projector and mount: short throw preferred, so check throw distance and room fit
- Works with all monitor types
Step 3: Plan Your Enclosure / Frame
DIY Frame Options
- EMT conduit (1" steel pipe): the cheapest sturdy route, needs a pipe bender or fittings. Good for net setups.
- 80/20 aluminum extrusion: modular and precise, with a professional look. Best for screen enclosures.
- PVC pipe: cheapest but less durable. Only for light net use.
- Pre-cut kits: fastest assembly, and some include the screen.
Key Frame Measurements
- Width: Your room width minus 6-12" clearance each side
- Height: Ceiling height minus 6-12" (account for projector mount)
- Depth: 12-18" behind screen for ball flight + padding
- Swing radius: Test with driver before finalizing
Step 4: Hitting Mat & Flooring
- Mat: a budget mat is fine to start; a thicker premium mat is kinder to joints and lasts longer.
- Flooring: interlocking foam tiles or a turf roll give a level surface.
- Platform: build a level platform if the floor is uneven (garage slope).
Step 5: Computer & Software
PC Requirements (Minimum)
- CPU: Intel i5-10400 / AMD Ryzen 5 3600 or better
- GPU: NVIDIA RTX 3060 12GB / AMD RX 6600 XT or better
- RAM: 16 GB DDR4
- Storage: 500 GB SSD
- OS: Windows 10/11
Simulation Software Options
- GSPro: best graphics and course library
- E6 Connect: official partner of several camera monitors
- TGC 2019: older, with a large course library
- Awesome Golf: free, basic, works with R10 and MLM2PRO
- Garmin Golf / Rapsodo app: free, mobile only, limited courses
Software pricing and subscriptions change. Confirm the current price with the vendor and enter it as the yearly software cost in the planner.
Step 6: Budget Breakdown by Build Level
| Component | Under $1,500 | $1,500–$4,000 | $4,000–$8,000 | $8,000+ |
|---|---|---|---|---|
| Launch monitor | Garmin Approach R10 | Rapsodo MLM2PRO | SKYTRAK ST MAX | Garmin Approach R50 |
| Net or screen | Practice net · $200 | Practice net · $300 | Impact screen · $1,500 | Impact screen · $1,500 |
| Hitting mat | $200 | $350 | $350 | $350 |
| Cables, padding or projector | $100 | $150 | $1,200 | $1,200 |
| Software (per year) | $250 | $250 | $250 | Not estimated |
| Estimated upfront | $880–$1,320 | $1,200–$1,800 | $4,840–$7,260 | $6,440–$9,660 |
Figures come from the same allowances as the cost calculator and the budget builds, in US dollars, with a ±20% range. They exclude tax, shipping, a computer and room work. Enter your own local prices in the planner.
Step 7: Room Preparation & Safety
- Ceiling height: Measure at hitting position — need 9+ ft for driver
- Lighting: Avoid direct light on screen; use indirect LED strips
- Electrical: Dedicated circuit for projector + PC; surge protector
- Ventilation: Garage builds need airflow; consider mini-split
- Padding: Wall and ceiling padding behind the screen
- Side netting: Contain errant shots
Common DIY Mistakes to Avoid
- Underestimating ceiling height: Measure with mat + tallest golfer's driver
- Skipping swing test: Slow-swing with driver before any purchase
- Wrong projector throw ratio: Match projector to screen width & room depth
- Inadequate PC specs: Integrated graphics won't run GSPro smoothly
- Ignoring side protection: Shanks happen — protect walls and valuables
- No cable management: Trip hazards and damaged cables
Next Steps
- Measure your space → Room Size Guide
- Compare monitors → Launch Monitor Room Requirements
- Calculate your budget → Cost Calculator
- Build your 3D plan → 3D Room Planner
Guide updated 5 November 2026. Sources and methodology · Garage-specific guide · Budget build guide
Frequently asked questions
How much does it cost to build a golf simulator?
BayPlan's starter builds estimate $880–$1,800 upfront for a practice-net setup and $4,840–$9,660 for an impact-screen setup, before tax, shipping, a computer and room work. Yearly software is separate. Open the cost calculator to enter your own prices.
What do you need to build a golf simulator?
Essential components: launch monitor, hitting mat, net or impact screen, enclosure or frame (for a screen), projector (for a screen), gaming PC or tablet, simulation software, and cables. Optional: padding, lighting, and flooring.
Can you build a golf simulator in a garage?
Yes, garages are popular for DIY simulators. You need 10+ ft width, 15+ ft depth, and 9+ ft ceiling height measured below the door tracks. Account for parked cars, shelving, and door clearance.
How do I choose a launch monitor for a DIY build?
Start with your room. Rear radar needs depth behind the ball, camera systems need width beside it, and ceiling mounts need clear height. Then match the monitor to your budget and the software you want. See the launch monitor room requirements for documented figures.
How do you build a golf simulator enclosure?
Options: 1) Steel pipe frame (EMT conduit) with netting, the cheapest DIY route. 2) Aluminum extrusion frame (80/20) with an impact screen, durable and precise. 3) Pre-cut enclosure kits, the easiest to assemble. Make sure the frame clears your swing radius.