GARMIN R10 ROOM GUIDE

Garmin Approach R10 Room Requirements

Space, depth, and ceiling height for the Garmin R10 indoors. See the published minimums, how much room the rear radar needs, and whether your room can fit it.

QUICK START

Start your space plan.

Enter any measurements you know, or continue and add them later.

Comparing monitors? Read the launch monitor guide or check room size and dimensions.

Garmin R10 Room Requirements at a Glance

These are the published indoor minimums for the Garmin Approach R10, plus what each number controls.

Garmin Approach R10 indoor room requirements
RequirementPublished minimumWhat it controls
Room length (depth)15 ft (4.57 m)Ball flight plus space behind the ball
Room width8 ft (2.44 m)Clear space across the hitting area
Room height8 ft (2.44 m)Device placement, not a swing guarantee
Ball to net or screen8 ft (2.44 m)Ball-flight distance for tracking
Device behind the ball6–8 ft (1.83–2.44 m)Rear-radar placement

Garmin’s indoor placement guidance. Garmin’s dimensions are device minimums; your full swing and barrier still need checking.

HOW THE DEPTH ADDS UP

Eight feet to the net, six behind the ball.

The R10 sits behind the ball and tracks the shot toward the net or screen. That means room depth is not just ball-to-net distance. You also need the space behind the hitting position.

  • Ball to net or screen: at least 8 ft.
  • Device behind the ball: 6–8 ft.
  • Planning buffer: BayPlan adds 1 ft behind the device.

With 6 ft behind the ball, an 8 ft ball-to-net plan uses 15 ft of depth. Moving the ball to 10 ft from the net uses 17 ft. A screen or enclosure setback can reduce the usable depth further.

Garmin R10 Ceiling Height

Garmin’s 8 ft indoor minimum is a placement requirement for the device and ball flight. It does not certify that a driver swing clears an 8 ft ceiling. A 6 ft player’s driver swing typically peaks near 8.5 ft, so plan 9–10 ft of clear height and test the real swing.

Read the full golf simulator ceiling height guide for heights by golfer height and what to do when the ceiling is too low.

Garmin R10 Room Dimensions in Feet and Meters

Garmin R10 reference dimensions, converted to meters
MeasurementFeetMeters, rounded
Room width minimum8 ft2.44 m
Room depth minimum15 ft4.57 m
Room height minimum8 ft2.44 m
Ball to barrier minimum8 ft2.44 m
Device behind ball6–8 ft1.83–2.44 m

These rounded conversions explain the reference dimensions; keep your original measurements when checking a boundary.

Will the Garmin R10 Fit Your Room?

Enter your clear width, depth, and ceiling height in the 3D room planner. The planner compares your room with Garmin’s published R10 minimums, adds the rear planning buffer, and shows the ball and device together. It also flags the swing check you still have to make in person.

Next, review room size and dimensions, the home simulator cost breakdown, or compare the R10 with other launch monitors.

Guide updated 27 October 2026. Device sources and interpretation · Room size guide · Ceiling height guide · Build your room plan in 3D

Frequently asked questions

What are the Garmin R10 room requirements?

Garmin lists an indoor room at least 15 ft long, 8 ft wide, and 8 ft high. It also calls for at least 8 ft from the ball to the net or screen and 6–8 ft from the device to the ball. Treat these as device minimums and add clearance for your full swing.

How much space do I need behind the Garmin R10?

Garmin specifies 6–8 ft behind the ball. The R10 is a rear-facing radar monitor, so it needs to sit behind the hitting position to track the ball. BayPlan plans 6 ft behind the ball plus a 1 ft buffer, then verifies the total room depth.

What ceiling height does the Garmin R10 need?

Garmin's indoor minimum is 8 ft high. That is a device placement minimum, not a guarantee that a driver clears the ceiling. Plan 9–10 ft of clear height for most golfers, and test a slow full swing with your longest club.

How far should the Garmin R10 be from the net or screen?

At least 8 ft from the ball to the net or screen. More ball-flight distance is generally better for radar tracking and safety, but the total must also include the 6–8 ft behind the ball. An 8 ft ball-to-net plus 6 ft behind the ball uses 14 ft, before a planning buffer.

Can the Garmin R10 work indoors in a small room?

It can work indoors if the room gives you the published minimums and room behind the ball. A small room that cannot fit 6–8 ft behind the hitter will not work with the R10, even if the width and ceiling look adequate. Measure the clear rectangle at the hitting position.

Does the Garmin R10 need to be behind the ball?

Yes. The R10 is a rear-facing radar monitor, so it sits behind the ball and watches the shot travel away from it. Camera-based monitors are usually placed to the side instead, which changes the room layout.