OUR METHOD

What a plan can—and cannot—tell you.

BayPlan compares measurements you provide with documented requirements for the selected monitor. Each finding links to its manufacturer source. Meeting those dimensions still requires an in-person swing and hazard check.

Current device coverage

Garmin Approach R10: Garmin lists a room at least 15 ft long, 8 ft wide, and 8 ft high, at least 8 ft from ball to net or screen, and 6–8 ft from device to ball. BayPlan uses a 6 ft device distance and adds a 1 ft planning buffer behind it. Garmin indoor placement guidance, checked 28 September 2026.

Rapsodo MLM2PRO: Rapsodo specifies at least 8 ft from ball to net and a device position 6.5–8.5 ft behind the ball. BayPlan uses 6.5 ft for its depth check. The cited guidance does not explicitly confirm an impact screen, so screen placement requires confirmation. It also gives no fixed room width or height; taller players may need more room for swing video. No extra rear clearance is included in the calculated minimum. Rapsodo setup FAQ, checked 2 October 2026.

SKYTRAK ST MAX: The user guide calls for a 10 × 10 ft unobstructed area and says safe ceiling height depends on player height and club length. BayPlan compares entered room width and depth with those dimensions, but users must confirm the entire area is clear. The guide does not give a fixed ball-to-barrier distance, so that placement remains unchecked. ST MAX user guide, checked 2 October 2026.

Uneekor EYE MINI LITE: Place beside the hitting area, level with the hitting surface and parallel to the target line, following the manual. The detection zone is not a room minimum. Fixed room width, depth, ceiling, and ball-to-barrier minimums are not established by the cited source and remain unchecked. A planned ball distance longer than the room depth fails the physical placement check. Manufacturer guidance, reviewed 4 October 2026.

Garmin Approach R50: Place approximately 1.5 ft to the side of the tee, facing the ball. Garmin recommends the same height as the hitting surface for best results. Follow the manual for alignment. Fixed room width, depth, ceiling, and ball-to-barrier minimums are not established by the cited source and remain unchecked. A planned ball distance longer than the room depth fails the physical placement check. Manufacturer guidance, reviewed 4 October 2026.

Foresight GC3: Confirm GC3 placement and indoor clearance with Foresight. GC3s and Launch Pro packages have different terms and are not used for these checks. Fixed room width, depth, ceiling, and ball-to-barrier minimums are not established by the cited source and remain unchecked. A planned ball distance longer than the room depth fails the physical placement check. Manufacturer guidance, reviewed 4 October 2026.

Other and undecided monitors have no device-specific fit check. The room preview uses your room dimensions and chosen ball position. It shows a monitor only for Garmin R10 and Rapsodo MLM2PRO when a documented placement is available for the selected setup. Otherwise, the ball position is labeled as a planning choice and monitor placement remains unverified.

The 3D room can be rotated, zoomed, and viewed from above or from the hitting position. Equipment, the garage door, and the person for scale are illustrative. Their sizes do not represent a specific product or your actual fixtures. The one-foot floor grid and dimension guides show scale; they do not measure swing clearance. Printing and browsers without 3D support use a top-down plan.

What remains unknown

The app cannot measure swing clearance, fixture positions, a parked car, net quality, projector throw, or your exact installation. It marks those checks for confirmation. A dimension that meets a published minimum is not a guarantee that the setup is safe.

Costs

The planner and cost worksheet offer estimated allowances or manual prices. Estimates use the selected monitor, net or screen setup, and accessory spending level, not room floor area. Monitor allowances use rounded regular-price or published package references. Promotional offers are displayed separately with their source and review date. They are dated snapshots, not live prices, and are applied to your budget only when you choose “Use reference price.” Selecting a model preserves entered prices, including $0 for equipment you own.

Changing the accessory level does not change the monitor or your entered prices. R10, MLM2PRO, and ST MAX retain an optional $250/year general software allowance, not a subscription quote. EYE MINI LITE, R50, and GC3 leave annual software unknown until you enter the combined fees for your chosen package. Free practice software does not imply free course play. Enter $0 only when no recurring fees apply.

Accessory levels are BayPlan planning assumptions, not surveyed market prices or recommended products. Standard is the default. The assumptions are:

The upfront planning range varies estimated equipment allowances by 20% in either direction. Entered prices, including $0 for owned equipment, and additional costs remain fixed. This is a sensitivity scenario, not a market price range or a guarantee. Unknown equipment remains unknown and makes the range incomplete. Manual mode supplies no estimates.

Add tax, shipping, computer/tablet, renovation, or installation as a combined one-time amount; these are excluded when left blank. Avoid counting an item twice. The optional 0–30% contingency reserve applies once to equipment and added one-time costs, including entered prices. It does not apply to annual software and is not a calculated tax charge. The same percentage applies at each end of the range.

The upfront budget comparison includes that reserve and extra costs. First-year costs add one year of software; the annual software row shows recurring costs separately. Missing equipment or software prices are flagged, and excluded extras are stated. Custom or undecided monitors need a user price. Verify product prices and subscription terms before purchasing.